Coats RC-55 Rim Clamp Tire Changer w/ RC Robo-Arm
Part No: CTS-RC-55E
Alaska, Hawaii, & any/all US territories & international orders are excluded.
Updated for today's high-speed, general service repair shop. Dependability and reliability were proven through decades of testing. RC-55's Robo-Arm power-assist provides needed assistance on low profile and runflat tire applications. The RC-55 has 21in external clamping capability, up to 10.5in rim width, and up to 50in overall wheel diameter range. This unit is available with either an air or electric tabletop motor.
- RC Robo-Arm: Effortlessly keeps the top bead in the drop center during mounting, allowing technicians to efficiently change difficult wheel applications, such as low-profile wheels and run-flat tires, commonly found on many OE vehicles.
- Built-in Bead Sealing Jets: Quickly seal beads while tabletop inflation provides a faster workflow.
- High Torque, X-Shaped Turntable: Designed for rigid perimeter support of the wheel. Pedal controls make tire mounting and dismounting easier for technicians, especially when working in high volumes.
- Manual Swing Arm: Easily adjusted so that the Coats Duckhead Mount/Demount Tool is properly fitted to the tire rim. This will reduce the risk of damage when mounting and demounting the tire.
- Conveniently Placed Foot Pedals: Provide precise control over every step of the changing process. The pedals are ideally placed for fluid technician movements while mounting and demounting tires.
- Inflation Gauge: Easily and accurately inflate from 0 to 60 PSI. With a pressure limiter and easy-to-read gauge, the built-in tire inflation system ensures technician safety and prevents TPMS related comebacks.
- Wheel Protection: Available options include Bead loosener socks, clamp booties, and lift tool protection to prevent metal-to-metal contact that causes scratching or marring.
Specs:Operation: 1st Loosen Bead, 2nd Mount/Demount
Wheel Handled: Alloy & Steel, Car & Light Truck
Mount / Demount: Swing Arm
Tool Head Offset: Manual
Table Shape: X-Shaped
Wheel Clamping Method: Four Clamps, Air Cylinder Operated
Height of Table to Floor: 28.5in (724 mm)
Bead Loosening System: Foot-Controlled Air Cylinder (up to 10.5in wide)
Bead Lifting System: Tire Bar
Air Drive System (85609950): 1.5HP Air Motor 110-175psi, 15scfm
Electric Drive System (8560995001): 1HP Electric Motor, 110v, 60hz, 15amp
Inflation Pressure Control: Limiter
Assist Arms/Tools: RC-Robo Arm
Clamps: Fixed (2 Position)
Bead Seating Reservoir: Vertical 3.4 Gal. in Tower
Inflation Gauge: 60 psi
Air Supply Gauge: 0-300 psi
Water Filter/Lubricator: Filter / Lube
Optional Protectors: Plastic Inserts for Metal Mount/Demount Duckhead Tool, Clamp Socks
Min / Max Rim Diameter: 6in-24in External / 10in-27in Internal:
Max Rim Width: 10.5in (267mm)
Max Tire Diameter: 50in (1270mm)
Rotation Speed: Electric = 1 Speed / Air = Variable:
Chassis Footprint: 35inw x 44ind x 75inh
Weight: 620 lbs.