Bend-Pak XPR-10XLS Tallest 10K Symmetric Two Post Lift
Part No: BP-XPR-10XLS
Alaska, Hawaii, & any/all US territories & international orders are excluded.
Tall techs no longer have to strain themselves while they work. The XPR-10XLS is a high-reach symmetrical two-post lift customized with an optional extension kit and/or Low-Pro™ arms. Perfect for vehicles of all sizes. A must-have tool to help taller techs stand upright while they work.
The XPR-10XLS Symmetrical Lift Offers MORE Lifting Height
Our tallest lift carriages ever
The 59in carriage height on the XPR-10XLS is the highest in class for our 10K two-post lifts. You’ll be hard-pressed to find a safer lift at a better value for your taller techs. Finally, tall mechanics can work ergonomically—no more painful stooping!
The XPR-10XLS two-post lift has two HVLP direct-drive cylinders that operate at low pressure and replace the lifting chains, and screw-type mechanisms often featured on other lifts. The downward motion of the piston rod raises the massive 75” lifting height, and dual-synchro equalizers ensure a safe, even, worry-free lift.
Two-Stage telescoping screw pad assembly kit
Gouge and tear-resistant polyurethane pads are designed to last longer than others. They're fast-rising and easy to adjust to the perfect height. We even throw in a set of 63 mm stackable adapters.
Triple-telescoping front arms and two-stage rear arms
These arms increase the overall arm positioning for lifting a variety of wheelbases. Overall arm sweep and minimum arm reach are also extended to precisely lift vehicles with unibody construction, with pick-up points suited for both wide and narrow configurations.
Choose Low-Pro™ arms
BendPak's exclusive Low-Pro arms are perfect for low ground-clearance cars, trucks, and SUVs. The arms aren't actually lower to the ground, but when they telescope outward, the top of the arm channels remain closer to ground level. The design of the XPR-XLS-LP helps prevent damage that might otherwise occur to vehicle side skirts and/or undercarriages.
Thanks to a bolt-on extension, the XPR-10XLS-181 offers 181-inches overhead clearance while maintaining the lift's safety and structural integrity. This effectively places your two-post lift among the tallest and most efficient models ever built. The XPR-XLS already features a taller lift carriage. This extended-height variant improves on that by offering increased room for vehicles above and that room for taller techs working below.
Choose low-profile AND extended-height
With the increased lift carriage height of the XLS, tall mechanics have an easier time working underneath. Add the Low-Pro arms, and low-stance cars are easily accommodated. Also, include the bolt-on extension kit, and there's nothing too tall for this lift. The XPR-XLS-LP-181 two-post lift is by far the most versatile variant of this lift, and it's a must-have option for every busy auto shop nationwide.
- Lift arms shown with optional foot guards
- 10,000‐lb. lifting capacity
- Expandable top beam accommodates wide or narrow configuration
- Double‐telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Single‐piece columns
- Dual hydraulic direct‐drive cylinders
- Automatic arm restraints
- Lowered arm tube supports
- Maintenance-free UHMW load bearings
- Oversized 59in the tall carriage for superior strength and durability
- Electric/hydraulic power system
- Large, 17in x 19in A36 steel base plate
- Self‐lubricating dura‐glide UHMW polyethylene bearing system
- Single‐point safety release
- Safety locks in each column spaced every 3in
- Automatic overhead shutoff
- Plated arm restraints and arm pins for rust prevention
- Heavy‐duty 1/2in aircraft‐quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4‐piece 63 mm stackable adapter set comes standard
- ALI Certified
Lifting Capacity*: 10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle: 5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle: 5,000 lbs. (2,268 kg)
A - Rise:: 75in (1,905 mm)
B - Rise + Pad Only:: 79.75in (2,026 mm)
C - Rise + Pad + 63 mm Adapter:: 82.25in (2,089 mm)
D - Min. Height + Pad:: 4.75in (121 mm)
Time to Full Rise:: 50 seconds
E - Height Overall:: 157in (3,988 mm)
F - Width Overall:: 132in (3,353 mm) or 145in (3,683 mm)
G - Outside Columns:: 126.75in (3,219 mm) or 139.75in (3,550 mm)
H - Inside Columns:: 105.5in (2,680 mm) or 118.5in (3,010 mm)
I - Drive-Thru Clearance:: 93in (2,362 mm) or 106in (2,692 mm)
J - Floor To Overhead Switch:: 147in (3,734 mm)
Arms & Pads
K - Front Arm Reach: (MIN): 25.5in (648 mm)
K - Front Arm Reach: (MAX): 49.5in (1,257 mm)
L - Rear Arm Reach: (MIN): 32.25in (819 mm)
L - Rear Arm Reach: (MAX): 52.5in (1,334 mm)
Screw Pad Adjustment:: 2in (51 mm)
Max Load Per Arm: 2,500 lbs. (1,134 kg)
Motor:: 220 VAC / 60 Hz / 1 Ph
Noise:: 45 dB
Weight:: 1,778-lbs. (806.5 kg)
Dimensions:: 162in x 24in x 32in (4,114 mm x 609 mm x 812 mm)
Optional - Low Pro Arm (XPR‐10XLS‐LP):
The Low-Pro™ Arms is NOT True SymmetricClear floor Versatility - Rugged Dependability
The safe and rugged XPR‐10XLS‐LP two‐post lift features our exclusive Low‐Pro™ arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. A telescoping overhead structure provides the convenience of wide or narrow installation wrapped up into one configurable package. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements.
The highly sophisticated yet simple and dependable XPR‐Series design requires minimal service or maintenance for an overall lower cost of ownership. All BendPak's XPR two‐post models feature dual "direct‐drive" low‐pressure cylinders, maintenance‐free UHMW load bearings, single‐piece columns, extra-tall lifting carriages, and triple‐telescoping arm configuration for increase arm positioning versatility. Double‐telescoping screw pads with gouge and tear-resistant polyurethane pads to help increase workplace safety and reduce operating costs. A set of our 63mm stacking adapters are also included as standard accessories.
Telescoping Low-Pro™ arms.
The safe and rugged XPR-10XLS-LP two-post lift features BendPak's exclusive Low-Pro™ arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis.
Bend-Pak Warranty:5 Years Lift structure
2 Years Hydraulic cylinder(s) and power unit
1 Year Operating components
1 Year Electrical components (excluding power unit)
1 Year Labor Warranty on site or at factory*
1 Year Free‐Shipping** on ground‐freight charges related to warranty performance
More Info Here