Create Account

BendPak XPR-12FDL 12K Floor Plate, Direct-Drive 2-Post Car Lift

BendPak XPR-12FDL 12K Floor Plate, Direct-Drive 2-Post Car Lift
application carCar
application light truckLight Truck

BendPak XPR-12FDL 12K Floor Plate, Direct-Drive 2-Post Car Lift

  • SKU: BP-XPR-12FDL $6,120.00
For Business Financing from Learn More

Part No: BP-XPR-12FDL

Free Shipping
Ground Shipping to Lower 48 States
Alaska, Hawaii, & any/all US territories & international orders are excluded.


XPR-12FDL Offers Heavy-Duty Lifting Capability

The XPR-12FDL is the perfect lifting application for everything that falls in its weight class. Two robust posts are capable of raising some truly massive trucks and SUVs. This might be classified as our “medium-duty” lift, as it covers almost every vehicle in the homeowner/residential arena. It also lifts some commercial vans and trucks, including high-rise vehicles like Sprinters.

However, even though this car lift is made to handle massive vehicles, it belongs in every auto shop or serious DIY garage that lifts trucks, farm equipment, work vans, etc. It might be the most versatile lift you ever own, given that its low-profile arms will easily reach the lift points of low-stance race cars and sports cars (including both foreign and domestic models). The columns are set wide to fit trucks and SUVs, but the dual triple-telescoping arms reach farther than the arms on our lighter-duty lifts. With the XPR-12FDL, you’re not sacrificing the ability to service smaller vehicles as you gain the ability to service large ones.

The XPR-12FDL is an open-top design. An open-top lift does not have a crossbar over the top of the lift, which is desirable for taller vehicles. The hydraulic lines run on the floor, under a floorplate, between the posts.

Dual Direct-Drive two-post car lift technology

We prefer Direct-Drive technology for our 12K two-post lift, as opposed to lifting chains and screw mechanisms. Direct-Drive hydraulic technology has very few moving parts, so there’s less that can go wrong or require service over time. We carefully engineering the dual-synchro equalization system to ensure safe, level working conditions at all times.

Triple-telescoping arm set

Our lighter-duty two-post lift models feature a mixture of two-stage and three-stage telescoping arms. Because a 12K capacity lift needs to make room for wide trucks, vans, and SUVs, we set the columns farther apart. We can still reach virtually all lift points on smaller vehicles by only including three-stage arms.

Low-profile, dropped-end frame contact pads

The XPR-12FDL makes safely reaching under low-profile cars safely and easily. The dropped-end design ensures vehicle doors and chassis don’t get scratched or dinged during placement of the arms and pads against the lift points.

16-Piece adapter set/standard

We won’t risk compromising your safety just to get a few extra bucks with a separately sold accessory that’s actually necessary. So, we include a versatile and essential two-post lift accessory kit for your convenience. In this kit, you get four 6in stackable adapters, four 3in stackable adapters, four polyurethane contact pads, and four frame cradle pads. You no longer have to worry about lifting trucks with running boards or those auxiliary fuel tanks, which made car lift operation a pain.

Lowered arm tube supports

By lowering the arms tubes, we ensure vehicle doors can open and close without catching the supports.

Automatic arm restraints

The arm restraints on a two-post lift are one of the most essential safety features. These restraints are essentially what keep the arms locked during the lift. They lock automatically while the arms ascend the lift carriage, and they disengage when the lift is fully lowered.

Taller lift carriages

Sometimes the magic of BendPak construction exists in the details. Taller lift carriages reduce stress on the columns, so we make ours 53” high. That’s taller—and safer than our competition.

Maintenance-free load bearings

UHMW load bearings, unlike older-style roller bearings, don’t need lubrication and quite literally never degrade over time. They last forever and aren’t negatively affected by chemicals or oils.

Single-piece columns

How long do you want your columns to last? Decades? Good, that’s how we feel too. And that’s why we make our columns out of a single piece of steel. It makes for a stronger, longer-lasting structure overall.

Single-point safety release

The safety release on every XPR-12 car lift is single-point and easy to use. We keep our operations simple, so you stay safe at all times.

Auto shutoff

Our high-grade overhead shutoff bar stops all action on the lift at the moment a vehicle comes into contact with it.

High-speed hydraulics

For a faster operation that doesn’t compromise safety—and in fact, increases it—we include, free-flow, high-pressure 3/8in hydraulic lines, a high-flow pump, and an integrated AC power unit.


  • 12,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Open-top eliminates overhead obstruction
  • Single-piece columns
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual direct-drive hydraulic cylinders
  • Oversized 53in tall carriage for superior strength and durability
  • Large, 25in x 22in A36 steel base plate
  • Electric/hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3in
  • Plated arm restraints and arm pins for rust prevention
  • Heavy-duty 1/2in aircraft-quality equalizer cables
  • Oversized 6in cable sheave diameter reduces cable fatigue
  • 16-piece specialty adapter set includes four 6in stackable adapters, four 3in stackable adapters, four polyurethane contact pads, and four frame cradle pads
  • Front and rear triple-telescoping arms provide an increased range for lifting point access
  • Versatile drop-in contact pads with stackable adapters

Lifting Capacity*: 12,000 lbs. (5,443 kg)
*Max Capacity / Front Axle: 6,000 lbs. (2,722 kg)
*Max Capacity / Rear Axle: 6,000 lbs. (2,722 kg)

A - Rise: 69in (1,753 mm)
B - Rise + Pad Only: 74in (1,880 mm)
C - Rise + Pad + 63 mm Adapter: 79in (2,007 mm)
D - Min. Height + Pad: 5in (127 mm)
Time to Full Rise: 55 seconds

Outside Dimensions
E - Height Overall: 144in (3,658 mm)
F - Width Overall: 155in (3,937 mm)
G - Outside Columns: 146in (3,708 mm)

Inside Dimensions
H - Inside Columns: 118in (2,997 mm)
I - Drive-Thru Clearance: 103in (2,616 mm)

Arms & Pads
K - Front Arm Reach: (MIN): 39in (991 mm)
K - Front Arm Reach: (MAX): 59in (1,499 mm)
L - Rear Arm Reach: (MIN): 39in (991 mm)
L - Rear Arm Reach: (MAX): 59in (1,499 mm)
Max Load Per Arm: 3,000 lbs. (1,361 kg)

L - Height: 2in (51 mm)
M - Width: 8.5in (216 mm)

Power Unit
Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB

Weight: 2,445-lbs. (1,109 kg)
Dimensions: 151in x 29in x 37in (3835 mm x 737 mm x 939 mm)

Bend-Pak Warranty:

5 Years Lift structure
2 Years Hydraulic cylinder(s) and power unit
1 Year Operating components
1 Year Electrical components (excluding power unit)
1 Year Labor Warranty on site or at factory*
1 Year Free‐Shipping** on ground‐freight charges related to warranty performance
More Info Here

Other Popular Items:

Recently Viewed Items