Free Shipping

Our 10,000-pound capacity XP-Series two-post lifts are rugged, safe and reliable and will accommodate virtually every automobile and light truck.

• 10,000-pound lifting capacity
• Wide or narrow configuration
• Single piece columns
• Single point safety release
• Dual hydraulic “Direct-Drive” cylinders
• Electric/hydraulic power system
• Large, 19" x 17" steel base plates
• Self-lubricating dura-glide polyethylene bearing system
• Safety locks in each column spaced every 3-inches
• Automatic arm restraints
• Heavy-duty dual 3/8” equalizer cables with oversize sheaves
• Padded overhead safety-shutoff bar
• Truck and van adapters standard
• ETL approved / pending

Specs:

• Lifting Capacity: 10,000 Lbs. / 4536 Kg.
• Height Overall(*): 168" / 4267 mm.
• Width Overall (Outside of Base Plate): 145" / 3683 mm.
• Width (Outside of Columns): 137" / 3480 mm.
• Floor To Overhead Switch(*): 141" / 3581 mm.
• Inside Columns: 115" / 2921 mm.
• Reach (Front Arm Min.): 28" / 711 mm.
• Reach (Front Arm Max.): 55" / 1397 mm.
• Reach (Rear Arm Min.): 34" / 864 mm.
• Reach (Rear Arm Max.): 55" / 1397 mm.
• Min. Pad Height (*): 4" / 102 mm.
• Rise: 69" / 1753 mm.
• Max Lift Height (Pad Only): 73" / 1854 mm.
• Max Lift Height (6" Adapter): 79" / 2007 mm.
• Drive-Thru Clearance: 106" / 2692 mm.
• Motor (**): 220 VAC / 60hz. 1ph.
• Time of full Rise: 45 Seconds
• Max Load Per Arm: 2,500 Lbs. / 1134 Kg.

* An optional bolt-on top extension for columns raises the overhead bar an additional 24". Must be ordered from factory at time of order.
** Low profile arms are available as an option.
*** Special Voltages Available Upon Request.
The design, material and specifications are subject to change without notice.

CATEGORIES XPR-10CX-168 IN: 2 Post Lift, Bend-Pak, New Products