Free Shipping

10,000-pound capacity XP-Series two-post lifts are rugged, safe and reliable and will accommodate virtually every automobile and light truck.

Feature:

• 10,000-pound lifting capacity
• Wide or narrow configuration
• Single piece columns
• Single point safety release
• Dual hydraulic “Direct-Drive” cylinders
• Electric / hydraulic power system
• Large, 19" x 17" steel base plates
• Self-lubricating dura-glide polyethylene bearing system
• Safety locks in each column spaced every 3-inches
• Automatic arm restraints
• Heavy-duty dual 3/8” equalizer cables with oversize sheaves
• Padded overhead safety-shutoff bar
• Truck and van adapters standard
• ETL approved / pending

Specs:

• Lifting Capacity : 10,000 Lbs. / 4536 Kg.
• Height Overall(*) : 145" / 3683 mm.
• Width Overall (Outside of Base Plate) : 132" / 3353 mm.
• Width (Outside of Columns) : 124" / 3150 mm.
• Floor To Overhead Switch(*) : 141" / 3581 mm.
• Inside Columns : 102" / 2791 mm.
• Reach (Front Arm Min.) : 25" / 635 mm.
• Reach (Front Arm Max.) : 46" / 1168 mm.
• Reach (Rear Arm Min.) : 34" / 864 mm.
• Reach (Rear Arm Max.) : 55" / 1397 mm.
• Min. Pad Height (*) : 4" / 102 mm.
• Rise : 69" / 1753 mm.
• Max Lift Height (Pad Only) : 73" / 1854 mm.
• Max Lift Height (6" Adapter) : 79" / 2007 mm.
• Drive-Thru Clearance : 93" / 2362 mm.
• Motor (**) : 220 VAC / 60hz. 1ph.
• Time of full Rise : 45 Seconds
• Max Load Per Arm : 2,500 Lbs. / 1134 Kg.

* An optional bolt-on top extension for columns raises the overhead bar an additional 24". Must be ordered from factory at time of order.
** Low profile arms are available as an option.
*** Special Voltages Available Upon Request.
The design, material and specifications are subject to change without notice.

CATEGORIES XPR-10C IN: 2 Post Lift, Bend-Pak, New Products