Free Shipping

Our 10,000-pound capacity XP-Series two-post lifts are rugged, safe and reliable and will accommodate virtually every automobile and light truck.

• 10,000-pound lifting capacity
• Wide or narrow configuration
• Exclusive "Tru-Metric" arm design provides more versatile arm positioning
• 30-degree rotated single piece columns
• Single-point safety release
• Dual hydraulic "Direct-Drive" cylinders
• Electric / hydraulic power system
• Large, 19" x 17" steel base plates
• Self-lubricating dura-glide polyethylene bearing system
• Safety locks in each column spaced every 3-inches
• Automatic arm restraints
• Heavy-duty dual 3/8” equalizer cables with oversize sheaves
• Padded overhead safety-shutoff bar
• Truck and van adapters standard

Specs:

• Lifting Capacity: 9,000 lbs. / 4082 kg.
• Height Overall(*): 145" / 3683 mm.
• Width Overall (Outside of Base Plate): 145" / 3683 mm.
• Width (Outside of Columns): 139" / 3531 mm.
• Floor To Overhead Switch(*): 141" / 3581 mm.
• Inside Columns: 112" / 2845 mm.
• Reach (Front Arm Min.): 25" / 635 mm.
• Reach (Front Arm Max.): 46" / 1168 mm.
• Reach (Rear Arm Min.): 46" / 11168 mm.
• Reach (Rear Arm Max.): 60" / 1524 mm.
• Min. Pad Height (*): 4" / 102 mm.
• Rise: 69" / 1753 mm.
• Max Lift Height (Pad Only): 73" / 1854 mm.
• Max Lift Height (6" Adapter): 79" / 2007 mm.
• Drive-Thru Clearance: 102" / 2591 mm.
• Motor (**): 220 VAC / 60 Hz. 1Ph.
• Time of full Rise: 45 Seconds
• Max Load Per Arm: 2,500 Lbs. / 1134 Kg.

* An optional bolt-on top extension for columns raises the overhead bar an additional 24". Must be ordered from factory at time of order.
** Low profile arms are available as an option.
*** Special Voltages Available Upon Request.
The design, material and specifications are subject to change without notice.

CATEGORIES XPR-10ACX IN: 2 Post Lift, Asymmetrical Lifts, Bend-Pak, New Products