Free Shipping

Descriptions: It is Not a Still! Kleer-Flo has been engineering parts washers and formulating solvents for more than six decades. And now that technology has produced an effective alternative to the problem of solvent disposal by allowing you to use your parts washing solvent indefinitely.
Kleer-Flo's SEP-R-ATOR ™ eliminates the need for contracting with outside rental services and ends the worry over EPA regulations. In short, SEP-R-ATOR ™ recycles parts washing solvent. Solvent does not wear out, it gets dirty. So, instead of throwing money away, you can save money and increase profits.
SEP-R-ATOR ™ is not a still. It uses a unique high technology process* to restore solvent to like-new purity at a rate in excess of 10 GPH (Gallons per Hour). It is simple and safe requiring only a 110V outlet and ordinary tap water supply. No need for explosion-proof environment or special wiring. No worries about hot vapors or heating and cooling cycles.
Most important, SEP-R-ATOR gives you 100% control over yours parts cleaning operation. You're no longer dependent on outside suppliers or contact service groups.

Specs:

• Overall Machine:
  Length: 29"
  Width: 33"
  Height: 37"
• Tank Capacities (Maximum):
  Dirty Solvent Reservoir: 30 gallons
  Recycled Solvent Reservoir: Aux. Container Required
  Gallons per hour cleaned: 5*
• Electrical Requirements:
  Voltage: 110V (220V available)
  Phase: single
  Motor Horsepower: 38780
  Water Connections: 3/4"
• Miscellaneous:
  Residue Drain Height above floor: 11"
  Recycled solvent drain height above floor: N/A
  Weight : 390 lbs.

*Output rates depend on solvent. You can contract for monthly service and pay forever, or you can recycle your own parts washer solvent…

• Save money
• Get plug-it-in simplicity
• High-tech process, not high-temp distillation

CATEGORIES KT-S430 IN: Solvent Reclaimer, KleenTec