Free Shipping

Advantage Series

• Multi-finned Cylinders
  Cooler temperatures result in longer life and consistent performance over time.
• Integral Cylinder/head
  Gasketless design eliminates the possibility of blown head gaskets for trouble-free operation.
• Balanced Pistons
  Aluminum alloy first-stage piston is weight-matched to the cast iron second-stage piston, ensuring proper balance.
• Piston Rings
  Three compression rings and one oil control ring provide excellent oil control, minimum blow-by and high efficiency air delivery.
• Lightweight Connecting Rods
  High-density, die-cast aluminum alloy rods minimize reciprocating weight. An integral precision-bored crank pin bearing and a needle bearing for the piston pin properly distribute bearing loads for longer bearing life than bushings.
• Pressure Relief Valves
  Located in interstage and discharge.
• Intercoolers
  Large-diameter finned tubing is positiond to obtain the greatest cooling effect between stages for maximum compressor efficiency.
• Optimized Cooling Fan/flywheel
  Precision balanced fly wheel has fan blades for optimum compressor cooling and life.
• Reliable, High-flow Valves
  Single-unit, disc-type valves provide low lift and long life. Discs are made of corrosion resistant Swedish steel. Valves are easily serviced by removing the manifolds only.
• Oversized Main Bearings Tapered roller-type main bearings deliver the longest possible life.
• Balanced Crankshaft
  Constructed of rugged ductile iron with large diameter throws for minimum bearing loads and counterweights to minimize vibration.
• Large Capacity Crankcase
  Rugged cast iron oil reservoir has convenient sight gauge glass, corner oil fill boss and large oil drain.
• Loadless Starting
  Positive acting, governor-type centrifugal unloader assures longer motor life by allowing the compressor to start unloaded every time.

CONVENIENCE: Up to six standard, pre-installed accessories.

• Mounted magnetic starter
• Vibro isolators
• Automatic tank drain
• Low oil level switch
• Air-cooled aftercooler
• Dual control

SPECS:

• HP 25
• PUMP R-70A
• MOTOR VOLT / PHASE 208 / 3 or 230 / 3
• TANK CAP (Gal.) 120
• L x W x H DIMEN. IN. 73-1/2" x 27-1/2" x 64"
• RPM @ 125 PSI 890
• CFM DISP. @ 125 PSI 255.6
• CFM DEL. @ 125 PSI 204.2
• RPM @ 175 PSI 770
• CFM DISP. @ 175 PSI 218.8
• CFM DEL. @ 175 PSI 180.2
• RPM @ 250 PSI 660
• CFM DISP. @ 250 PSI 187.4
• CFM DEL. @ 250 PSI 153.6

CATEGORIES HRA25-12 IN: Advantage Series, Champion