Free Shipping

The HD-9-B is your vehicle storage and service solution and the ultimate tool for the DIY’er. Available with casters, drip-trays, jack platform and more.

• 9,000-pounds lifting capacity
• Freestanding design
• ETL approved
• Perfect for PARKING, STORAGE or SERVICE
• Runways accommodate wide or narrow vehicles.
• Runways include rail kit for optional accessories.
• Single hydraulic cylinder mounted underneath runway.
• Fully enclosed lifting cables, safety locks, and sheaves.
• Internal “anti-sway’ slider blocks in each column.
• Pneumatic push-button safety release.
• Features heavy-duty 3/8” aircraft cable.
• Longer approach ramps for low ground clearance vehicles.
• Safety locks enclosed in columns minimize pinch points.
• Oversized sheave diameter reduces cable fatigue.
• Rugged, self-lubricating cable sheaves combined with 1-1/4” sheave axles are fully enclosed minimizing pinch points.
• Multi-position safety locks in each column.
• Power unit can be located at the front or rear of the lift.
• Approach ramps can be removed for added drive-under clearance.
• Independent “back-up” slack-cable safety latches.
• Optional drive-thru ramps available.
• Optional drip trays available.
• Optional solid deck increases storage capacity.
• Optional 4,500 lb. air/hydraulic rolling jacks available.

Specs:

• Lifting Capacity: 9,000 lbs. / 4082 kg.
• Overall width: 120-3/4” / 3067 mm.
• Outside length: 174” / 4420 mm.
• Overall length: 200” / 5080 mm.
• Height of columns: 88” / 2235 mm.
• Min. Runway height: 4-1/2” / 114 mm.
• Max. Rise: 70” / 1778 mm.
• Max. Lifting height: 74-1/2" / 1892 mm.
• Width between columns: 106-3/4” / 2711 mm.
• Runway width: 19” / 483 mm.
• Width between runways(*): 37-1/4” – 44” / 946 mm. – 1118 mm.
• Length of runways: 164” / 4166 mm.
• Locking positions: 12
• Lock spacing: every 4" / 102 mm.
• Lifting time: 45 seconds
• Standard motor (**): 220 VAC / 60 Hz. 1Ph.

* This dimension may be limited with the addition of rolling jacks.
See rolling jack specifications on separate page.
** Special Voltages Available Upon Request
The design, material and specifications are subject to change without notice.

CATEGORIES HD-9-B IN: 4 Post Lifts, Bend-Pak, New Products