Free Shipping

The HD-12LS-B is a space-saving four-post alignment lift designed for professional 4-wheel or 2-wheel alignment service.

Feature:

• Four-Post Alignment Lift
• 12,000 pound lifting capacity
• Heavy-duty turn plates included
• Multi-position turn plate pockets
• Integrated rear slip-plates
• Automatic leveling system
• Runways include rail-kit for optional accessories
• Electric / hydraulic power system
• Single hydraulic cylinder mounted underneath runway
• Internal “Anti-Sway’ slider blocks in each column
• Features heavy-duty ½” aircraft cable
• Oversized self-lubricating cable rollers
• Rugged 1-3/8” roller axles
• Multi-position safety locks in each column
• Ramps feature non-skid surface
• Push-button safety release
• Runways adjust for different tread widths
• Optional drive-thru ramps available
• Optional 6000 pound capacity rolling jacks available (Model RB-60’s)
• ETL Approved

Specs:

• Lifting Capacity* : 12,000 lbs. / 5443 Kg.
• Overall Width : 130" / 3302 mm.
• Outside Length : 181" / 4597 mm.
• Overall Length : 211” / 5360 mm.
• Height of Columns : 88” / 2235 mm.
• Min. Runway Height : 8-3/4" / 222 mm.
• Max. Rise : 70” / 1778 mm.
• Max. Lifting Height : 78-3/4” / 2000 mm.
• Width Between Columns : 116" / 2946 mm.
• Runway Width : 20" / 508 mm.
• Width Between Runways (*) : 32" - 49" / 813 mm. – 1245 mm.
• Length of Runways : 174" / 4420 mm.
• Min. 4-Wheel Alignment (**) : 72" / 1828 mm.
• Max. 4-Wheel Alignment (**) : 135" / 3428 mm.
• Max 2-Wheel Alignment (**) : 151" / 3835 mm.
• Locking Positions : 12
• Lock Spacing : Every 4" / 102 mm.
• Lifting Time : 60 Seconds
• Motor (***) : 220 VAC / 60 Hz. 1Ph.

* This dimension may be limited with the addition of rolling jacks.
See rolling jack specifications on separate page.
** May vary depending on wheel size.
*** Special Voltages Available Upon Request.
The design, material and specifications are subject to change without notice.

CATEGORIES HD-12LS-B IN: Alignment Lifts, Bend-Pak, New Products