Free Shipping

The HD-12-B is a full-length four-post runway style lift designed for professional use.

Feature:

• 12,000-pounds lifting capacity
• ETL approved
• Runways accommodate wide or narrow vehicles
• Runways include rail kit for optional accessories
• Single hydraulic cylinder mounted underneath runway
• Fully enclosed lifting cables, safety locks, and sheaves
• Internal “anti-sway’ slider blocks in each column
• Pneumatic push-button safety release
• Features heavy-duty 1/2” aircraft cable
• Safety locks enclosed in columns minimize pinch points
• Oversized sheave diameter reduces cable fatigue
• Rugged, self-lubricating cable sheaves combined with 1-1/4” sheave axles are fully enclosed minimizing pinch points
• Multi-position safety locks in each column
• Power unit can be located at the front or rear of the lift
• Approach ramps incorporate built-in rear-wheel chocks
• Independent “back-up” slack-cable safety latches.
• Optional drive-thru ramps available.
• Optional drip trays available
• Optional 6,000 lb. air/hydraulic rolling jacks available

Specs:

• Lifting Capacity* : 12,000 lbs. / 5443 Kg.
• Overall width : 130" / 3302 mm.
• Outside length : 205" / 5207 mm.
• Overall length : 235” / 5969mm.
• Height of columns : 88” / 2235 mm.
• Min. Runway height : 7” / 178 mm.
• Max. Rise : 70” / 1778 mm.
• Max. Lifting height : 77” / 1956 mm.
• Width between columns : 116" / 2946 mm.
• Runway width : 20" / 508 mm.
• Width between runways(*) : 32" - 49" / 813 mm. – 1245 mm.
• Length of runways : 198" / 5029 mm.
• Locking positions : 12
• Lock spacing : every 4" / 102 mm.
• Lifting time : 60 Seconds
• Standard motor (**) : 220 VAC / 60 Hz. 1Ph.

* This dimension may be limited with the addition of rolling jacks.
See rolling jack specifications on separate page.
** Special Voltages Available Upon Request
The design, material and specifications are subject to change without notice.

CATEGORIES HD-12-B IN: 4 Post Lifts, Bend-Pak, New Products