Star-a-Liner Auto-Vision Computerized Measuring & 4-Wheel Alignment System (CHE-121F3000)
Free Delivery, Installation and Training
The collision industry’s most complete and advanced computerized measuring and Four-Wheel alignment system.
Auto-Vision consists of a computer and cabinet. The cabinet does not need to be close to the work area because of its unique multifunctional hand-held units located on each independent tower along with all necessary attachments. Towers roll on spring loaded bearings that will take the punishment of the harsh environment of a body shop.
Measuring from Underbody to Underhood is fast.:
In a matter of minutes, side and front brackets are positioned because of the movement versatility of the Auto-Vision measuring arm. The measuring arm can easily be moved away from and returned to the immediate work area. Control points from data charts are easily measured & stored in the report by pressing the record key on the hand-held unit.
With one setup the Auto-Vision can measure the entire vehicle. There are three measuring models plus wheel alignment.
Data Point Mode: integrated Mitchell vehicle specification charts to measure:
Frame Rails
Cradle Bolts
Strut Tower Bolts
Core Support
Fender Bolts
Suspension Bolts
Compare Point Mode: uses the undamaged side of the vehicle to establish measuring points to repair the damaged side.
Door Hinge Bolts
Striker Bolts
A-Pillars
B-Pillars
Suspension Parts
Point to Point Trandimensions: use Mitchell specification charts to measure:
Under the hood
Truck openings
Windshield openings
Door openings
Wheel Alignment
Four-wheel alignments are easily done using the Auto-Vision.
Camber, toe angles and caster are all determined by measuring off the wheels and SAI angle is determined by measuring upper and lower ball joints.
Key Feature
Auto Reset Function- If the vehicle moves during a repair it can be easily relocated by simply pressing the auto reset key on the handheld unit and remeasuring the 2 reference points stored during the set-up.