$ 375.00 Rebate with Free Installation and Training

The APX90 was designed to change the toughest runflats and extra-large custom wheels with easex including Michelin® PAX® other tough assemblies. Without strenuous effort and without damage to expensive custom wheels. Not only are these tough jobs made easy, but the APX90 makes quick and efficient work of conventional tires and wheels. The Coats APX90 provides a path to increased shop efficiency and profitability, enabling you to service virtually any job that comes in your shop.

The APX90 can handle nearly any application, with the ability to service wheels from 9" to 32" and without the need for additional adapters. At the same time it provides an ergonomic user experience with intuitive and easy to operate features, so that you can focus on changing tires without complicated training issues. Capacity, Productivity, and Protectionx the APX90 delivers on all counts.

FEATURES:

• Service Wheels Up To 32" Without Special Adapters: Coatsx exclusive X-shaped tabletop provides constant clamping pressure to provide optimal support and control. Have special applications such as negative offset or reverse mount rims? The APX90 handles these and others flawlessly, without the need to purchase additional costly adapters and accessories. And our industry leading Rim Clamp® design virtually eliminates the need for advanced technician training often found with other tire changer styles.
• Wheel Lift Reduces Effort and Lessens Damage Risk: Our integrated wheel lift makes positioning the wheel on the turntable almost effortless for the technician, so therex s less stress and strain, or opportunities for damage.
• Increase Efficiency and Avoid Wheel Damage with Coats Exclusive Bead Loosening System: The exclusive Coats design enables complete power in, power out, and stop control over the bead loosening shoe, eliminating cylinder travel time with the shoe moving only as much as required. The benefits to you are increased productivity and reduced risk of wheel damage.
• NoTire Tool For Lower Bead Removal: Powered Horizontal Rollers are used to demount the bottom bead with no tire tool required. The patented RoboArm® can be used for additional assistance when demounting the bottom bead. These helpers reduce operator effort and make servicing heavy and stiff wheels easy.
• The Patented Coats RoboArm® applies direct pressure to create a bead lock and provide extra leverage on runflat and low-profile tires.
• The Duckhead® Roller keeps the bead in location under the Duckhead® when mounting a difficult low-profile tirex can be removed when it is not needed.
• Powered Horizontal Rollers allow easy bead and rim lubrication, loosen top beads, plus assist in mounting runflat and low-profile tires. Also used to demount the lower bead, with no tire tool needed!
• The RoboRoller® uses two tapered wheels to provide additional power when mounting very large diameter runflat and low-profile tires.

SPECS:

• Drive System
  APX90E - Electric
  APX90A - Air
• Wheels Handled
  Steel, alloy, high-performance, and PAX® (with optional accessory kit).
• Rim Diameter
  9" - 30" Outside Clamps
  11" - 32" Inside Clamps
• Maximum Tire Width
  16"
• Tire Diameter
  44"
• Mount/Demount Mechanism
  Automatic tilt back.
• Tool Head Offset Adjustment
  Pneumatic lift, set back, and lock.
  18" Clearance Duckhead to Clamps.
• Shape of Tabletop
  "X" shaped for rigid perimeter support of the wheel.
• Wheel Clamping Method
  Four self-cleaning and self-centering clamps in table top actuated by two pneumatic cylinders.
• Bead Loosening System
  Hand actuated 8" dual action cylinder for wheels up to 16" wide.
• Helper Devices
  RoboArm®, RoboRoller®, Horizontal Power Rollers, Duckhead® Roller, Wheel Lift.
• Bead Seating Reservoir
  5.7 gal. separate tank, pressure protected.
• Pressure Limiter
  Standard.
• Filter Lubricator
  Standard with automatic drain and large capacity lubricator bowl.
• Inflation Gauge
  Easily calibrated 0 to 60 PSI gauge with protection to 200 PSI. Damage resistant
  Lexan faceplate.
• Electric Drive System
  2HP high-torque, 110v, single phase,
  25 amp.
• Required Air Source
  110 to 175 PSI 2HP compressor
  5 SCFM @ 150 PSI (for Electric Model);
  15 SCFM @150PSI (for Air Drive Model).
• Operating Footprint
  90" x 102"
• Shipping Weight
  1,510 lbs.

Michelin® PAX® System Accessory Kit:

• Because the APX90 was designed from its inception to service the Michelin® PAX® System, there is no retrofitting of machine needed. Coats offers a simple PAX® accessory kit to provide you with everything needed to easily service these tough assemblies.
• And unlike many other PAX® tire changers on the market, the Coats APX90 is capable of PAX® support ring extraction and insertionx without the need to purchase an additional, expensive separate workstation that takes up valuable shop space. (Electric drive APX90E recommended for servicing Michelin® PAX® assemblies.)

CATEGORIES APX90EX IN: Coats Rebate, Coats, Coats, Car & Light Truck Tire Changer Machines