|
|
Accu-Turn Multi-Speed Brake Lathe w/ Drum & Rotor (ACC-8944L)
|
|
|
|
Free Shipping
LATHE MUST BE PURCHASED WITH AN ADAPTER PAKAGE
- 8010 - $ 640.00
- 8020 - $ 852.15
- 8030 - $ 1,000.00
- 8040 - $ 1,380.00
Add extreme versatility in both feed rates and arbor speeds to our World Class model 8922 and you have the model 8944. Infinitely adjustable feed rates, multiple arbor speeds offers the most in versatility for the experienced lathe technician.
The Accu-turn model 8944 Variable Speed Bench lathe incorporates Accu-turn's legendary one cut finish performance with the advanced capabilities that infinitely adjustable feed speeds and multiple arbor speeds offer the discerning technician. With three available arbor speeds, and infinitely adjustable rotor and drum feed speeds, you have complete control over the microfinish surface machined.
FEATURES: Infinetly adjustable feed rates - You have the ability to easily modify the feed rate with the turn of a dial. Reduce the cut time or increase the microfinish dependent on the jobs needs. Now you have the versatility.
Three arbor speeds - Easily change arbor speeds in seconds, Choose 100, 150 or 200 RPM dependent on the size of work at hand. Speed up for smaller import work, slow down for larger truck work.
Positive rake cutter tip angle - Provides for one pass finish virtually everytime, allowing you to complete the work faster than multiple pass machining processes. Metal and heat come off the top of the tip as you machine allowing for, regardless of the amount of material.
Dovetail Way and Adjustable Gibb Design - The most dependable repeat guidance system in the machining industry. System provides for the ability to adjust out any tolerance increase caused by years of wear. Maintain factory tolerances for the life of the lathe. Dovetail ways are covered by stainless steel way covers for maximum performance.
Tapered Roller Bearing Spindle - The lathe spindle is supported by Timken tapered roller bearings for years of maintenance free turning.
Massive lathe housing casting - Combining a total mass of 470 lbs and a solid table top platform design the 8944 eliminates transient vibrations ensuring a smooth uninterrupted surface finish on every pass.
Independent DC feed motors - Utilizing independent feed motors for rotor and drum improves the lathes versatility to machine all varieties of drums and rotors. Through a separated switch wiring we substantially reduce the possibility of catastrophic operator error.
| SPECS: |
POWER REQUIREMENTS
A) STANDARD
B) OPTIONAL |
115 Volt, 50/60 Hertz
*220 Volt, 1 phase optional |
ROTOR
A) CAPACITY
B) MAX WIDTH OF SURFACE
C) MAX THICKNESS |
A) 4"-24" (102-610 mm)
B) 4-1/2" (114 mm)
C) 2-1/4" (57mm) |
DRUM
A) CAPACITY
B) DEPTH OF CUT |
A) 6" - 28" (152 - 711 mm)
B) 6" (152 mm) |
FLYWHEEL (flat or stepped)
A) CAPACITY
B) FRICTION SURFACE CAPACITY |
A) 6" - 24" (152-610 mm)
B) 6" (152 mm) |
DRUM, ROTOR, FLYWHEEL MAX WEIGHT
A) ON STANDARD ARBOR
B) ON HEAVY DUTY ARBOR |
A) 150 Lbs. (68 kg)
B) 300 Lbs. (136 kg) |
| SPINDLE SPEED |
100 - 150 - 200 RPM |
FEEDS PER REVOLUTION
(Infinitely Variable)
A) ROTOR
B) DRUM |
A) .001" - .010" (.026 - .254 mm)
B) .0015" - .015" (.039 - .381 mm) |
| MOTOR |
1 HP (.0700 KW) |
| STANDARD TOOLS PACKAGE |
| Part No. |
Product Description |
| 433701 |
Arbor 1" (25mm) |
| 433713 |
Arbor Nut |
| 433702 |
Drawbar |
| 436410 |
Wrench, 1-1/2" |
| 434559 |
Wrench, 7/8 (22mm) |
| 434558 |
Wrench, 3/8" (10mm) |
| 433750 |
Twin cutter Assembly with Right Hand Tool Holder (433763) and Straight Tool Holder (433286) |
| 433796 |
Carbide Inserts, 10 pack |
| 433764 |
Left Hand Tool Holder |
| 433782 |
Drum Silencer |
| 433774 |
Spacer, Twin Cutter |
| 433172 |
Boring Bar Assembly with Right Hand Short Tool Holder (433779) |
| 433175 |
Washers (not pictured) |
| 433633 |
T-Bolt |
| 4B4280 |
Washer - Qty 2 |
| 433617 |
Nut - Qty 2 |
| BRAKE LATHE PACKAGES - PACKAGE # 8010 |
| Part No. |
Product Description |
| 433703 |
Bell Clamp, 5.56"-Qty 2 |
| 433704 |
Bell Clamp, 4.06"-Qty 2 |
| 433707 |
Centering Cone; 3"-4" |
| 433706 |
Centering Cone; 2.25"-3.25" |
| 433705 |
Centering Cone; 1.5"-2.5" |
| 433712 |
Spacer; 1" |
| 433716 |
Spring |
| 433717 |
Double Taper; 2.44"-2.85" |
| 433710 |
Double Taper; 2.075"-2.45" |
| 433709 |
Double Taper; 1.7"-2.08" |
| 433708 |
Double Taper; 1.31"-1.71" |
| 433963 |
Double Taper; 1.25"-1.65" |
| 433785 |
Silencer, Rotor Vented, Large |
| 433789 |
Silencer, Non-vented, Small |
| BRAKE LATHE PACKAGES - PACKAGE # 8020 |
| Part No. |
Product Description |
| #8011 ▼ |
Automotive Kit ▼ |
| 460572 |
Flange Plate; 4.80" |
| 460573 |
Reversible Center Cone; 2.00"-3.98" |
| 460574 |
Arbor Spacer; 2.00"-(Qty 2) |
| 460575 |
Automotive Composite Flange Plate; 5.43" |
| 460579 |
Automotive Cone; 1.84"-2.20" |
| 460580 |
Automotive Cone; 2.12"-2.47" |
| 460581 |
Automotive Cone; 2.37"-2.75" |
| 460582 |
Automotive Cone; 2.65"-3.00" |
| 460583 |
Automotive Cone; 2.92"-3.30" |
| 460592 |
Arbor Spring; 1.92"x1.00" |
| 433711 |
Double Taper; 2.44"-2.85" |
| 433710 |
Double Taper; 2.075"-2.45" |
| 433709 |
Double Taper; 1.7"-2.08" |
| 433708 |
Double Taper; 1.31"-1.71" |
| 433963 |
Double Taper; 1.25"-1.65" |
| |
| 438190 |
Spring Silencer Band |
| 438195 |
Chain Silencer Band |
| 434296 |
Clip On Silencer |
| PACKAGE # 8030 |
| Part No. |
Product Description |
| #8011 |
Automotive Kit |
| #8012 ▼ |
Light Truck Kit ▼ |
| 460578 |
Light Truck Composite Plate; 7.25" |
| 460584 |
Light Truck Centering Cone;3.20"-3.75" |
| 460585 |
Light Truck Centering Cone;3.47"-3.85" |
| |
| 438190 |
Spring Silencer Band |
| 438195 |
Chain Silencer Band |
| 434296 |
Clip On Silencer |
| PACKAGE # 8040 |
| Part No. |
Product Description |
| #8011 |
Automotive Kit |
| #8012 |
Light Truck Kit |
| #8013 ▼ |
Larger Light Truck Kit ▼ |
| 460576 |
Large Light Truck Flange Plate; 7.25" |
| 460577 |
Large Light Truck Flange Plate; 6.50" |
| 460586 |
Light Truck Centering Cone; 3.75"-4.12" |
| 460587 |
Light Truck Centering Cone; 4.03"-4.40" |
| 460588 |
Light Truck Centering Cone; 4.30"-4.67" |
| 460589 |
Light Truck Centering Cone; 4.57"-4.95" |
| 460590 |
Light Truck Centering Cone; 4.85"-5.22" |
| |
| 434295 ▼ |
Truck Double Taper Set ▼ |
| 434289 |
Truck Double Taper; 2.840"-3.195" |
| 434290 |
Truck Double Taper; 3.190"-3.560" |
| |
| Silencers ▼ |
| 438190 |
Spring Silencer Band |
| 438195 |
Chain Silencer Band |
| 434296 |
Clip-On Silencer |
| 34650 |
Heavy Drum Silencer Band (not pictured) |
CATEGORIES ACC-8944L IN: Bench Brake Lathes, Accu-Turn
|
|
If you have used this product and would like to place a comment Add your Review
|
|
|
|
|
|
Company Info | Contact ATS | Knowledgebase | Site Map | Request a Catalog | Fax/Mail Order Form
|
|
Translate to: Arabic | Chinese | German | Japanese | Korean | French | Italian | Spanish | Portugese
|
 |