Free Shipping

LATHE MUST BE PURCHASED WITH AN ADAPTER PAKAGE

• 8010 - $ 599.00
• 8020 - $ 797.00
• 8030 - $ 1,098.00
• 8040 - $ 1,739.00

If turn around time is high on your "got to have" list, the 8920 is the lathe for you. With a 180rpm shaft speed this lathe can machine a 2" face rotor in less then 4 minutes, regardless of the depth of cut. It also happens to be our least expensive bench lathe.

The Accu-turn model 8920 bench lathe is our fastest bench lathe, offering the best compromise of reduced speed and superior surface finish. With a 180 rpm arbor speed the 8920 machines most 2 face rotors in LESS then 4 minutes while still achieving the flatness, parallelism and surface finish you expect from the Industry's leading lathe manufacturer. Of course the 8920 also incorporates Accu-turn's legendary one cut finish performance with the simplicity and durability required for all levels of technicians. Designed to handle virtually all passenger and light truck rotors and drums. Optional accessories and shops available for expanded medium duty truck work.

FEATURES: Increased arbor speed - Turnaround time on rotors and drums is reduced to the lowest possible time without sacrificing surface finish or cutting tip life. Sure we could have gone faster, but we won't ever sacrifice the finish and quality machining capability you expect from Accu-turn by creating dazzling speed claims. We provide you with the best of both worlds. Reduced time and quality finish.

Positive rake cutter tip angle - Provides for one pass finish virtually everytime, allowing you to complete the work faster than multiple pass machining processes. Metal and heat come off the top of the tip as you machine allowing for one pass machining with virtually any depth of cut. Get it in, get it out faster then any lathe in the industry.

Dovetail Way and Adjustable Gibb Design - The most dependable repeat guidance system in the machining industry. System provides for the ability to adjust out any tolerance increase caused by years of wear. Maintain factory tolerances for the life of the lathe. Dovetail ways are covered by stainless steel way covers for maximum performance.

Tapered Roller Bearing Spindle - The lathe spindle is supported by Timken tapered roller bearings for years of maintenance free turning, the same system that automotive spindles have relied on for years.

Massive lathe housing casting - Combining a total mass of 470 lbs and a solid table top platform design the 8920 eliminates transient vibrations ensuring a smooth uninterrupted surface finish on every pass. Cutting platform actually sits in a 200 lb iron casting, not suspended on a support mechanism.

Independent AC feed motors - Utilizing independent feed motors for rotor and drum improves the lathes versatility to machine all varieties of drums and rotors. Through a separated switch wiring we substantially reduce the possibility of catastrophic operator error. Providing smooth, consistent feed, day in and day out for years.

No possibility of chip contamination under rotor cutter.

CATEGORIES ACC-8920L IN: Bench Brake Lathes, Accu-Turn