Free Installation and Training

CLAMPS WHEELS EXTERNALLY UP TO 24" Wheels keep getting bigger and more expensive. The Coats 9024E allows you to changer tires on oversized wheels (up to 24") while providing complete protection. You can clamp interanlly up to 26". You can service the expending market for custom alloy wheels.

IMPROVED BEAD LOOSENER ACTION Cam operated bead loosener ensures contact with wider wheels at the proper angles. Minimizes risk of wheel damage.

POWER DEVICES THAT DO 90% OF THE WORK Power taper rollers, pneumatic drop center, and swing-in rollers handle approximately 90% of the effort required to change even the toughest tire. Technician can concentrate on efficiency.

THE COATS 9024E PROVIDES PROTECTION FOR WHEELS AT EVERY STEP OF THE PROCESS. Bead loosener socks, clamp booties, and lift tool protection prevent metal-to-metal contact that causes scratching or marring.

FEATURES The Coats 9024E Tire Changer was designed to handle everything from the simplest standard steel wheel to the largest most delicate custom alloy wheels. Multiple power features allow you to change even difficult run flat and low profile tires with minimal effort and maximum efficiency.

PUSH BUTTON CONTROL Easier operation and simpler control selection.


24" TABLE TOP Handles the biggest custom tire and wheel assemblies.


NEW PEDAL DIVIDER Makes it easier for the operator to select the right pedal operation fordesired function.

• Speed: Pneumatic drop center, power taper roller, and swing-in rollers speed up floor-to-floor times and reduce operator fatigue.
• Accuracy: Precision gauges mean accurate inflation, and our Xshaped tabletop provides the right clamping pressure to the most delicate wheels without damage.
• Durability: Super-tough fiber reinforced composite air cylinders virtually never wear out, and bead looseners have extra support blocks for extra protection and durability.
• Ease of Use: Foot controls are positioned for easy access. Built in bead sealing jets and table top inflation help simplify the job.
  

SPECS:

• WHEELS HANDLED Steel, alloy, and performance.
• MOUNT/DEMOUNT MECHANISM Automatic tilt back.
• TOOL HEAD OFFSET ADJUSTMENT Pneumatic lift, set back, and lock.
• SHAPE OF TABLETOP "X" shaped for rigid perimeter support of the wheel.
• WHEEL CLAMPING METHOD Four self centering clamps in table top actuated by two pneumatic cylinders.
• BEAD LOOSENING SYSTEM Foot control actuates 7-1/4" dual action cylinder that handles wheels up to 16" wide.
• ELECTRIC DRIVE SYSTEM 110v,30A single phase.
• PRESSURE LIMITER Standard.
• BEAD SEATING RESERVOIR 4.3 gal. separate tank, pressure protected.
• INFLATION GAUGE Easily calibrated 0 to 60 PSI gauge with protection to 200 PSI. Damage resistant Lexan faceplate.
• FILTER LUBRICATOR Standard with automatic drain and large capacity lubricator bowl.
• RIM DIAMETER 12" - 24" External, 14" - 26" Internal.
• MAXIMUM TIRE WIDTH 16 inches.
• TIRE DIAMETER 47 inches
• REQUIRED AIR SOURCE 110 to 175 PSI 2HP compressor, 5 SCFM at 150 PSI.
• OPERATING FOOTPRINT 56" x 73" x 83.5".

CATEGORIES 9024E IN: Coats, Coats, Car & Light Truck Tire Changer Machines