Free Delivery, Installation and Training

FAST:

• Efficient, 12 second cycle time on most truck wheels.
• Simple calibration.
• Automatic hub nut loosening.
• Automatic rim gauge return.

VERSATILE:

• Balances the full range of heavy-duty, RV and light truck tires.
• Single-spin dynamic, static and RV balancing modes.
• Back cone and truck cone mounting system.

ACCURATE:

• Direct-drive allows critical measurements to be taken while wheel is coasting.
• Interference from electric motor and pulley "noise" is eliminated.
• Bright LED displays clearly indicate amount and location of weight.

DURABLE:

• Hardened cones to prevent grooves and wear
• No pulleys or belts to adjust, wear slip, or break.
• Minimum of moving parts to maintain.
• Made in the USA

CONVENIENT:

• Vertical wheel mounting.
• Fully interlocking guard hood.
• Emergency stop button.
• Oversized weight bins.
• Convenient accessory storage on side pegs.
• No bolt down installation.

SPECS:

• TIRE DIAMETER Up to 46"
• RIM WIDTH 4-1/2" to 18"
• RIM DIAMETER 16" to 26"
• MAXIMUM TIRE WEIGHT 350 lbs.
• RESOLUTION �0.01 oz., �1.4 degress
• ACCURACY �0.5 oz. in truck mode, �0.1 oz. in car mode
• MOTOR Rated for 850 rpm
• POWER REQUIREMENTS 220 VAC, 50/60 Hz, 3 Phase, fused @ 30 amps

PARTS NO. STANDARD EQUIPMENT

• 307604 Allen Wrench
• 307605 Weight Hammer
• 308065 6401 Threaded Stud
• 308026 Accessory Pegs (4)
• 308062 Hood Spring (2)
• 308621 Caliper
• 308628 Small Cone
• 308629 Medium Cone
• 308630 Large Cone
• 308631 Truck Cone
• 308638 Truck Cone Spacer
• 308639 Back Cone Spring
• 308642 Pressure Drum
• 308645 Large Hub Nut Wrench
• 308646 Small Hub Nut Wrench
• 309618 Hub Nut

PARTS NO. OPTIONAL ACCESSORIES

• 109877 Hub Nut Centered Truck Cone Kit
• 110785 Speedy Dayton Wheel Adapter (20-22.5in)
• 110786 Speedy Dayton Wheel Adapter extension kit (22-24.5in)
• 143622 Space Plate
• 144059 3 Phase to 1 Phase Conversion Kit
• 144064 Truck Wheel Weight Tool
• 501 Hydraulic Roll-Around Lift for mounting tire and wheel assembly to the balancer
• 143935 Budd Adapter Plate for turck wheels with bolt circle diameters:
  
  
• 8 bolt - 10.827 in. (275 mm)
• 10 - 11 1/4 in. (285.75 mm)
• 10 bolt - 13 3/16 in. (335 mm)
  
  
• including 5 wing nuts, allen wrench, 5 threaded studs and nuts

CATEGORIES 6401-3 IN: Coats, Truck Tire Balancers