Free Shipping

Since its initial introduction four decades ago, the Ammco Model 4000B lathe has been a favorite of brake technicians everywhere. And for good reason. It's simple. It's fast. It's very precise. Ammco combination bench lathes support rotors or drums using a standard one inch arbor. And like all Ammco brake lathes, it almost never breaks down.

Feature:

• Twin cutter tools and quick drum-to-rotor changeover.
• Adjustable spindle speeds (if desired) allow for quick rough cut/finish cut ettings.
• Infinitely adjustable spindle-feed gear box.
• User-friendly ergonomics.
• Supports drums or rotors up to 100 lbs. using the standard one inch (25.4mm) arbor, or up to 200 lbs. using the optional 1.875 inch (47.63mm) arbor.

Specs:

• Max Rotor Diameter : 14.5" *
• Max Rotor Face Width : 3.75"
• Max Rotor Thickness : 1.875"
• Max Arbor Capacity:
  A: Standard -A. 100 lbs.
  B: Heavy Duty -B. 200 lbs.
  C: Outboard -
  (B & C are optional)
• Spindle Speed : 100, 200 RPM
• Drum Feed Rate : .002" to .020"/REV
• Rotor Feed Rate: .002"/.010"/REV
• Drum Depth: Up to 6.875"
• Shipping Weight: 365 lbs.

ACCESSORIES:

• A Kit - Most car applications (standard and composite)
• B Kit - Most car through 1/2 ton (standard and composite)
• C Kit - Most car through 1 ton with cones (standard and composite)
• D Kit - Most car through 1/2 ton (standard only)
• E Kit - Most car through 1 ton with double chuck (standard and composite)

CATEGORIES 4000B IN: Bench Brake Lathes, Ammco