Note: Press is shown without point of operation guarding. Guarding is required for safe operationx See ANSI B 11.2 bulletin.

Features:

• Adjustable return stroke, activated by proximity switch, permits accurate control of ram movement.
• Remote pressure adjustment easily sets maximum pressure desired.
• Light-sensitive thumb pads must be engaged simultaneously before ram will move and cannot be mechanically by-passed.
• Run-jog selector allows fast, easy job set- up.
• Hydraulic cylinders are manufactured to withstand 3000 psi, but are used at less than 2000 psi to prolong service life.

Specs:

• capacity: 4 Ton
• horsepower: 1
• rpm: 1800
• ram speed advance (inch/min): 510
• ram speed press (inch/min): 62
• ram speed return (inch/min): 475
• thread Dimension: 1"-14x1 1/4 deep
• throat: 7 1/2"
• table slot width: 2 1/2"
• ram travel: 12"
• maximum ram to table: 12 1/2"
• table to base: 10"
• table: 18"x11 1/2"
• base: 31"x19 3/4"
• height: 49 1/4"
• weight: 1229 lbs

CATEGORIES 28-604 IN: C-Frame Hydraulic Bench Press, Dake